Cost of iron pipes

MikeTurnrose · Post by **MikeTurnrose** » Fri Jul 13, 2012 2:55 pm

I was wondering what others were paying for galvanized 3/4" these days. I was just quoted $2.50/piece for 24" by a local plumbing supply shop. Thanks.

BoundaryMan · Post by **BoundaryMan** » Fri Jul 13, 2012 3:49 pm

Mike,
Home Depot sells a 1.5" @ 10 feet section pipe for about $10.00; but you have to cut it yourself.

dmi · Post by **dmi** » Sat Jul 14, 2012 8:18 pm

HOME DEPOT WILL CUT A 10' LENGTH TO SIZE

Stephen Johnson · Post by **Stephen Johnson** » Mon Jul 16, 2012 8:14 am

Dane is correct. I believe that they start charging a fee on the 2nd or 3rd cut.

MikeTurnrose · Post by **MikeTurnrose** » Mon Jul 16, 2012 8:50 am

Dane and Stephen,

Does Home Depot sell 3/4" ID? What do they charge to cut?

Thanks.

Mike

Stephen Johnson · Post by **Stephen Johnson** » Mon Jul 16, 2012 10:05 am

I don't know what they charge. As to sizes it depends on the store. Call one and ask.

land butcher · Post by **land butcher** » Mon Jul 16, 2012 11:52 am

Last time I checked our tags will not fit inside a 3/4" IP

I replumbed my house and had over a hundred feet of 3/4 in and nobody wanted it.

MikeTurnrose · Post by **MikeTurnrose** » Mon Jul 16, 2012 1:46 pm

Next time I'll call Home Depot to get size availability and cutting costs.

Stephen Johnson · Post by **Stephen Johnson** » Tue Jul 17, 2012 6:35 am

MikeTurnrose wrote:Next time I'll call Home Depot to get size availability and cutting costs.

Mike,

I wasn't meaning to be abrupt. After re-reading my post it sure did seem to me that it might be taken that way.

I really don't know the answers and to me the best way to find out is call Home Depot.

SJ

land butcher · Post by **land butcher** » Tue Jul 17, 2012 11:53 am

Years ago the company I worked for got their pipe from a salvage yard for about 1/2 the cost of a survey supply or building supply store.

Dylan Kolstad · Post by **Dylan Kolstad** » Fri Jul 20, 2012 6:44 am

I believe my last order of 3/4" x 36" was $4 or $4.50 per section, cut

California Surveyors Forums

Cost of iron pipes

Cost of iron pipes

Thanks for the input