Page 1 of 1

Where to buy 3/4" I.P. driver?

Posted: Wed Feb 10, 2021 6:26 pm
by sako
My helper lost the pipe driver, now I sit at desk and check every survey supply company's site, but to no avail.
Does anyone know where to buy those drivers for the 3/4" I.P.?

Re: Where to buy 3/4" I.P. driver?

Posted: Wed Feb 10, 2021 6:56 pm
by Jim Frame
I got mine at Lo-Ink, but they apparently no longer carry them. If you're unable to find a real one, a reasonable substitute is a 3/4" bolt. You might have to file the diameter down just a bit; you don't want too snug a fit or your map will say "SET 3/4" IP WITH 3/4" BOLT IN TOP."

Re: Where to buy 3/4" I.P. driver?

Posted: Wed Feb 10, 2021 9:28 pm
by sako
Jim, thanks for reply. Yes, I have hard time finding the driver.

Re: Where to buy 3/4" I.P. driver?

Posted: Thu Feb 11, 2021 7:18 am
by RAM
local hardware store, 4lb single jack and a oversized galv. pipe cap, been using for several years.

Re: Where to buy 3/4" I.P. driver?

Posted: Thu Feb 11, 2021 8:12 am
by A_O'Rourke, PLS
I had a machinist make mine "stainless steel" custom 2". I had acetal inserts made, for 3/4", 1", 1 1/2".

Re: Where to buy 3/4" I.P. driver?

Posted: Fri Feb 12, 2021 12:41 am
by sako
RAM wrote:local hardware store, 4lb single jack and a oversized galv. pipe cap, been using for several years.
What's a single jack?

Re: Where to buy 3/4" I.P. driver?

Posted: Fri Feb 12, 2021 12:56 am
by sako
By the way, we drove back to the scene of crime, searched with the metal detector and found the precious driver!

Re: Where to buy 3/4" I.P. driver?

Posted: Fri Feb 12, 2021 2:42 pm
by Jim Frame
What's a single jack?
A short-handled hammer, swung with one (single) hand. A long-handled hammer (swung with two hands) is colloquially known as a double jack.

Re: Where to buy 3/4" I.P. driver?

Posted: Fri Feb 12, 2021 6:50 pm
by sako
Jim Frame wrote:
What's a single jack?
A short-handled hammer, swung with one (single) hand. A long-handled hammer (swung with two hands) is colloquially known as a double jack.
Now I get it, the whole time I was trying to imagine a combination of the single jack with an oversized pipe cap, connected to each other.

Re: Where to buy 3/4" I.P. driver?

Posted: Sat Feb 13, 2021 9:02 am
by PLS7393
sako wrote:By the way, we drove back to the scene of crime, searched with the metal detector and found the precious driver!
Now paint it florescent pink!

Re: Where to buy 3/4" I.P. driver?

Posted: Mon Feb 15, 2021 9:11 am
by Stephen Johnson
Jim Frame wrote:
What's a single jack?
A short-handled hammer, swung with one (single) hand. A long-handled hammer (swung with two hands) is colloquially known as a double jack.
Thank you Jim.

Been doing this for nearly 54 years and today learned the meaning of a term I had heard for years without knowing what it was.