Page 1 of 3

3/4" Brass Tags

Posted: Sun Feb 21, 2010 2:07 pm
by PLS7393
Do you use these? Do you have one to spare for a collection?

If so, the Mount Diablo Surveyors Historical Society would be honored to receive one for a new collection. To keep with the theme of our exhibit at the upcoming CLSA/NALS 2010 Conference, would you please take one to Reno and deliver it to our booth in the Exhibit Hall?

If no one is at the booth, please drop it off in the "Donation Box" and we thank you in advance.

**Edited for Jim's post**
Thanks Jim, I meant to include: If your not attending the upcoming conference and would be so kind to donate one of your tags, please mail it to myself at:

5178 MOWRY AVE., STE 2151
FREMONT, CA 94538

Keith Nofield, PLS
Mount Diablo Surveyors Historical Society
Secretary & Exhibit Chairman

Posted: Sun Feb 21, 2010 2:23 pm
by Jim Frame
Hmmm...it's not clear whether you're soliciting tags for a durable collection, or trying to drive attendance at the convention. For those of us willing to donate a tag but not planning to be in Reno, can you clarify?

Thanks!

.

Posted: Mon Feb 22, 2010 8:37 am
by pls7809
Just promise there won't be some guy calling me later that they found my tag in Fremont somewhere, but I didn't file anything!!!

Posted: Mon Feb 22, 2010 8:48 am
by PLS7393
pls7809 wrote:Just promise there won't be some guy calling me later that they found my tag in Fremont somewhere, but I didn't file anything!!!
I do believe I am proud enough to set my own tags, which I have a couple thousand of, lol. Besides, your #7809 will be to shiny for me to use, lol.

Posted: Mon Feb 22, 2010 9:55 am
by goodgps
Why would anyone have a "collection" Why would someone remove or collect tags ??? Are these considered obsolete now ? I'm a ghast !!!!

How about substituting photos of some random tags as demonstration of "how survey monuments are marked" Ya only need a couple of real ones ???? I'm confused about this. . . .

Posted: Mon Feb 22, 2010 10:00 am
by pls7809
MDHS must be preparing some sort of display of tags. I think that's the purpose of this. Keith would know more of course.

Posted: Wed Feb 24, 2010 9:42 pm
by PLS7393
Thank you David L. for the donation!

Posted: Thu Feb 25, 2010 7:45 pm
by PLS7393
Thank you Bruce H.

Posted: Thu Feb 25, 2010 7:47 pm
by PLS7393
For those going to Reno, I hope to see you stop by the MDSHS booth during the Exhibitor's Reception and drop off a tag!

Posted: Sat Feb 27, 2010 11:25 am
by btaylor
Keith I have a few tags from older pipes in SM county I was unable to reset or I replaced with a new plug over the years that I have sitting in the truck - if you are interested in a few tags from some of the dead guys out here.

Posted: Sun Feb 28, 2010 1:18 pm
by Dave Lindell
Let us know what is the lowest number you receive.

(I'm probably in the top ten. Bottom ten?)

Posted: Sun Feb 28, 2010 6:03 pm
by land butcher
I'll mail one of mine.

I have a piece of wood made to look like a old west store front with tags I've collected over the years. Mostly working for the LS's. I'll include a pic.

Posted: Sun Feb 28, 2010 6:10 pm
by land butcher
goodgps wrote:Why would anyone have a "collection" Why would someone remove or collect tags ??? Are these considered obsolete now ? I'm a ghast !!!!

How about substituting photos of some random tags as demonstration of "how survey monuments are marked" Ya only need a couple of real ones ???? I'm confused about this. . . .
I think you will find that you can order anyones tags from a supplier without any questions asked.

Posted: Wed Mar 03, 2010 7:29 pm
by PLS7393
Thanks to everyone who brought a 3/4" brass tag, or other type of washer/tag to the 2010 CLSA/NALS Conf. in Reno. I came home to find a stack of envelopes with six additional 3/4" brass tags too. A bunch of you said you forgot, and will drop one in the mail to me, I look forward to receiving them on behalf of Mount Diablo Surveryors Historical Society. I hope all in attendance of the conference enjoyed our display with this years theme of "Monuments".

All of you chapter representatives will be receiving a reminder note as the next board meeting approaches too.

To answer your question Dave, so far the lowest number tag donated is . . . RE 682 (JF Davidson), donated by Ian Wilson from a job he did, and perpetuated an old hub and tag. So who has an older tag? I challenge you, heheheee! Let me inform you that the Mount Diablo Surveyors Historical Society has a collection of artifacts from Albert Givan, RE 001. Included in the collection is his original seal to make impressions on documents, along with his original certificate from the state!

Thanks again.

Posted: Thu Mar 04, 2010 9:44 am
by Mojavegreen
I have a few tags..RE 410...RE 246...RE 1126 and LS 1634 both still on the 2x2...what did I win?

Posted: Thu Mar 04, 2010 1:57 pm
by land butcher
Mojavegreen wrote:I have a few tags..RE 410...RE 246...RE 1126 and LS 1634 both still on the 2x2...what did I win?
A letter from the County surveyor wanting to know how you came into possession of them. :)

Posted: Fri Mar 05, 2010 7:05 pm
by PLS7393
I also would like to thank the following who have sent in tags:
David H., Jim F., Tom F., Ryan M., John M., thanks for the note Marty, and Phillip D. (for all nine).

Thanks again! Hope you all have seen the display posted earlier from Reno, and get more information at our website: www.mdshs.org

Posted: Sun Mar 07, 2010 10:30 am
by Ian Wilson
Keith-

RE862 belongs to JF Davidson

Davidson was business partner to AC Fullmor, who served as Riverside County Surveyor in the 40's(?).

Posted: Sun Mar 07, 2010 11:30 am
by Ian Wilson
Keith-

RE862 belongs to JF Davidson

Davidson was business partner to AC Fullmor, who served as Riverside County Surveyor in the 40's(?).

Posted: Sat Mar 13, 2010 9:09 pm
by PLS7393
Thanks Ian.
Not sure where I came up with the other name. Thought I looked it up correctly, but then . . .

Received a brass tag from Greg I., but then he is a member of MDSHS too.
Hope to see more tags coming in the mail too.

Posted: Thu Mar 18, 2010 12:04 pm
by PLS7393
Thanks to James H. for sending an envelope with brass tags of all employed land surveyors at Northstar Engineering.

Still looking for yours if you have not sent one in yet.

Thanks to all!

This is almost like reading

Posted: Thu Mar 18, 2010 2:22 pm
by bruce hall
portions of the book "Pass It On".

Posted: Thu Mar 18, 2010 2:55 pm
by E_Page
I found one of mine in my desk the other day. I'll try to remember to send it this weekend.

Posted: Thu Mar 18, 2010 6:26 pm
by mpallamary
I still owe you mine. How about I also send you some original wood hubs from Curt Brown's private collection? He gave his entire collection to me including the 4 that are shown in his boundary control book. I donated one to the recent CLSA conference.

I might have one with his original tagged 3 x 5 cards that I can send you. I also have a few stones he gave me but they won't ship well.

PS, I also owe you one of Curt's tags. I will locate one for you.

PSS, Don Wilson mentioned that he got to meet you at the conference. He had some kind words. Thanks for the hospitality extended towards him.

Posted: Fri Mar 19, 2010 6:42 am
by PLS7393
Thanks Michael!
MDSHS would be honored to receive a donation of any artifacts from Curt Brown. We are a non-profit org. so all donations are tax deductible. Save the stones and I will pick them up from you in person, hopefully in the near future.

Oh great, Don is talking about me too now, lol. He and I go back 10 years or so, and you should have known, cause you know how I roll. (Or is that you know how I pour, heheheee!)